“How to Remove UV DTF from Glass”  -MAXDTF- China Direct to Transfer UV DTF Film, China UV DTF transfer Film, Made in China

Ultraviolet (UV) Direct to Film (DTF) printing is an advanced technology used in various industries. UV inks dry almost instantly when exposed to UV light, making them highly durable and resistant to external factors. Sometimes, though, there’s a need to remove UV DTF inks, especially when they end up on surfaces like glass where they’re unwanted. If you find yourself facing such a situation, you’re in luck. Here’s a comprehensive guide to help you remove UV DTF from glass surfaces.

Materials & Tools Needed:

  1. Razor Blade or Plastic Scraper
  2. Isopropyl Alcohol or Acetone
  3. Soft, Clean Cloth or Microfiber Towel
  4. UV Ink Remover (optional)
  5. Safety Gloves
  6. Safety Goggles
  7. Warm soapy water

Step-by-Step Guide:

1. Safety First!

Always wear safety gloves and goggles when working with chemicals or sharp objects. This not only protects you from harmful chemicals but also from potential cuts when using the razor blade.

2. Scrape off Excess UV DTF:

Start by gently scraping off the larger, more accessible portions of the UV DTF using the razor blade or plastic scraper. Hold the blade at a 45-degree angle to the glass, ensuring not to scratch the surface. Make sure to move slowly and carefully.

3. Apply Isopropyl Alcohol or Acetone:

Dampen a soft cloth or microfiber towel with isopropyl alcohol or acetone. Gently rub the area where the UV DTF remains. These solvents help dissolve the ink, making it easier to remove.

Note: Always test a small area of the glass before applying any solvent to ensure there’s no reaction that could damage or stain the glass.

4. Use UV Ink Remover (Optional):

If the UV DTF ink is particularly stubborn, consider using a specialized UV ink remover. Apply according to the manufacturer’s instructions, which usually involves letting the remover sit on the ink for a specified amount of time before wiping or scraping it off.

5. Wash the Glass:

After you’ve removed the UV DTF, clean the glass with warm soapy water. This step will help ensure all residues, whether from the UV ink or the solvents used, are completely gone. Wipe the glass dry with a clean cloth or towel.

6. Inspect the Glass:

Check the glass for any missed spots or residues. If any remain, repeat the steps until the glass is clean.


  • Avoid using abrasive materials like steel wool, as they can scratch the glass.
  • Ensure proper ventilation when working with solvents. Fumes from chemicals like acetone can be harmful if inhaled in large amounts.
  • If you’re uncertain about a specific cleaner or chemical, consult the manufacturer’s guidelines or seek expert advice.


Removing UV DTF from glass might require a bit of effort, but with the right tools and techniques, it can be done effectively. Always prioritize safety, and make sure to clean up thoroughly after the process. With patience and care, your glass will be UV DTF-free and clear in no time!

Similar Posts