UV DTF for Embroidery – 70μm Film B In Roll For Transfer 0.30×100M
UV DTF for Embroidery is a cutting-edge technique that combines the precision of digital printing with the durability of embroidery, offering a versatile solution for textile decoration. This innovative process involves printing designs onto transfer film using UV-cured inks, which are then heat-pressed onto fabric. The result is a high-quality, vibrant design that is both flexible and resistant to fading.
One of the key advantages of UV DTF for Embroidery is its ability to produce intricate designs with sharp details, eliminating the need for traditional embroidery hoops or stitches. This not only speeds up production but also reduces costs, making it an attractive option for large-scale projects. Additionally, the use of UV-cured inks ensures that the designs remain vibrant and durable, even after multiple washes.
As a result, UV DTF for Embroidery is transforming the textile industry by providing a cost-effective, efficient, and high-quality alternative to traditional embroidery methods.
| Weight | 3.5 kg |
|---|---|
| Dimensions | 32 × 15 × 15 cm |
- Excellent Performance on Rigid Substrate
- Film A Printing
- Film B Transfer
- 0.5cm Dry Edge on Each Side
- With Adhesive Layer
| Relative Humidity | 35-65% |
| Temperature | 10-30°C |
- Place Film A in the cut-down position on your right hand.
- UV Printing (printer should have UV adhesive glue printing).
- Peel off the release paper of Film B.
- Laminate printed DTF (film A) graphics & position paper (filmB. remove OPP first) together with sheet laminator.
- Ensure the sheet laminator setting can remove all bubbles& laminate well with proper pressure.
- Remove Film A under graphics before transfer on substrates.
- Use fingers/squeegee to remove bubbles&make sure all graphics laminate well. Then remove the position paper.
